Designerkit

Showing all 3 results

  • @Interiorunivers

    119,50

    Greeny Bottles Are Green 10x10

    20 pcs

    Click'n Tile - CLEANER

    Click'n Tile Cleaner is used for cleaning surfaces before mounting the mounting plate and for washing the Chalk Chalk Markers.

    Tesa tape 12mm x 25m

    If you live in a rental home where Click'n Tile must be able to be dismantled without leaving any traces, or if you just want Click'n Tile temporarily installed, then Tesa tape is the solution. This Tesa tape is 12 mm wide, 25 meters long and reaches 1.5 m2.

    The adhesiveness of the tape depends on the surface of your wall. To ensure the best result, we therefore recommend that you perform an adhesion test before final assembly. The adhesion test is done by cleaning a small area and mounting a small piece of tape and let it sit for 48 hours, after which you remove the tape again. If the tape is easy to remove, then your wall is unfortunately not optimal for tape mounting.

    To ensure maximum adhesion, use Click'n Tile Cleaner to clean both surfaces (mounting plate and wall) before applying tape.

    Smooth'ish Grannys Lips 10x10

    20 pcs

    Smooth'ish Sweet Blush 10x10

    20 pcs

    Mounting plate 90x60 cm

    The mounting plate comes in size 900 x 600 mm and can be cut with scissors as needed.

    For the best results, it is important that the backplate is de-climatized before mounting.

    Special adhensive - Combi Flex - 524

    Click'n Tile adhesive is a resilient and fast-setting adhesive is free from any solevents and phthalates. The adhesive is used for mounting the Click'n Tiles mounting plate, and is adhered to substrates such as: wood, concrete, steel, tiles, glass and aluminum.

    The substrate must be firm, clean, grease-free, persistently dry and level.
    Flatness: Not more than ± 2 mm on a 2.0 meter straight cavity.

    Montage Extra applies to most material and can be used in eco-friendly construction.

  • Stella kit

    @Stella_reinholdt

    167,70

    Greeny Pear Off 10x10 × 5

    1 pcs

    Greeny Pear Off 10x10

    20 pcs

    Twenty Twenty Truly Lilac 10x10 × 5

    1 pcs

    Twenty Twenty Truly Lilac 10x10

    20 pcs

    Click'n Tile - CLEANER

    Click'n Tile Cleaner is used for cleaning surfaces before mounting the mounting plate and for washing the Chalk Chalk Markers.

    Vacuum cup

    The suction cup is a "MUST HAVE" item. You will love it when a tile needs to be taken off to be washed, or if you need to show your friends how ingenious your tile wall is.

    Tesa tape 12mm x 25m

    If you live in a rental home where Click'n Tile must be able to be dismantled without leaving any traces, or if you just want Click'n Tile temporarily installed, then Tesa tape is the solution. This Tesa tape is 12 mm wide, 25 meters long and reaches 1.5 m2.

    The adhesiveness of the tape depends on the surface of your wall. To ensure the best result, we therefore recommend that you perform an adhesion test before final assembly. The adhesion test is done by cleaning a small area and mounting a small piece of tape and let it sit for 48 hours, after which you remove the tape again. If the tape is easy to remove, then your wall is unfortunately not optimal for tape mounting.

    To ensure maximum adhesion, use Click'n Tile Cleaner to clean both surfaces (mounting plate and wall) before applying tape.

    Brass/Gold tile 10x10 × 9

    The Gold tile appears exclusive and luxurious and gives the tile wall an extremely sophisticated look.
    The gold tile is made by existing tiles having a thin gold surface treatment which is normally only used for aircraft or cars.
    The surface appears semi-matte. The gold tile can be cleaned with ordinary universal detergent or in the dishwasher.
    The tile can be purchased as single piece.

    1 pcs

    Mounting plate 90x60 cm

    The mounting plate comes in size 900 x 600 mm and can be cut with scissors as needed.

    For the best results, it is important that the backplate is de-climatized before mounting.

    Special adhensive - Combi Flex - 524

    Click'n Tile adhesive is a resilient and fast-setting adhesive is free from any solevents and phthalates. The adhesive is used for mounting the Click'n Tiles mounting plate, and is adhered to substrates such as: wood, concrete, steel, tiles, glass and aluminum.

    The substrate must be firm, clean, grease-free, persistently dry and level.
    Flatness: Not more than ± 2 mm on a 2.0 meter straight cavity.

    Montage Extra applies to most material and can be used in eco-friendly construction.

  • @Mycopenhagencastle

    150,00

    Vacuum cup

    The suction cup is a "MUST HAVE" item. You will love it when a tile needs to be taken off to be washed, or if you need to show your friends how ingenious your tile wall is.

    Click'n Tile - CLEANER

    Click'n Tile Cleaner is used for cleaning surfaces before mounting the mounting plate and for washing the Chalk Chalk Markers.

    Tesa tape 12mm x 25m

    If you live in a rental home where Click'n Tile must be able to be dismantled without leaving any traces, or if you just want Click'n Tile temporarily installed, then Tesa tape is the solution. This Tesa tape is 12 mm wide, 25 meters long and reaches 1.5 m2.

    The adhesiveness of the tape depends on the surface of your wall. To ensure the best result, we therefore recommend that you perform an adhesion test before final assembly. The adhesion test is done by cleaning a small area and mounting a small piece of tape and let it sit for 48 hours, after which you remove the tape again. If the tape is easy to remove, then your wall is unfortunately not optimal for tape mounting.

    To ensure maximum adhesion, use Click'n Tile Cleaner to clean both surfaces (mounting plate and wall) before applying tape.

    Brass/Gold tile 10x10 × 9

    The Gold tile appears exclusive and luxurious and gives the tile wall an extremely sophisticated look.
    The gold tile is made by existing tiles having a thin gold surface treatment which is normally only used for aircraft or cars.
    The surface appears semi-matte. The gold tile can be cleaned with ordinary universal detergent or in the dishwasher.
    The tile can be purchased as single piece.

    1 pcs

    Blues Heavenly 10x10

    50 pcs

    Mounting plate 90x60 cm

    The mounting plate comes in size 900 x 600 mm and can be cut with scissors as needed.

    For the best results, it is important that the backplate is de-climatized before mounting.

    Special adhensive - Combi Flex - 524

    Click'n Tile adhesive is a resilient and fast-setting adhesive is free from any solevents and phthalates. The adhesive is used for mounting the Click'n Tiles mounting plate, and is adhered to substrates such as: wood, concrete, steel, tiles, glass and aluminum.

    The substrate must be firm, clean, grease-free, persistently dry and level.
    Flatness: Not more than ± 2 mm on a 2.0 meter straight cavity.

    Montage Extra applies to most material and can be used in eco-friendly construction.